HSM baling presses can reduce the volume of your waste by up to 95%! Quick, easy and cost-efficient!
That means you can save valuable space which would otherwise be taken up at your site, plus, you will benefit from the generation of a secondary and valuable raw material – baled recyclable waste!
HSM builds baling presses which compress cardboard, foils or other packaging material into compact bales weighing up to 550 kg. This high degree of compression saves expensive storage space and makes transport and handling easier.
The bales have the ideal size for perfect HGV load utilisation. This saves on transport costs and increases the marketing efficiency of the bales, which the large waste disposal companies will buy from you as valuable material.
Due to both their performance and durability, HSM V-Presses are the economic waste management solution par excellence: The HSM V-Press reduces costs of the most underestimated cost centre: “waste disposal.”
The vertical baling press HSM V-Press 860 TimeSave has, in addition to the well-known advantages of the V-Press series, a decisive added-value factor: significant savings in time with less staff needed for the task. Easy, fast and economical. That is how the latest addition to the HSM GmbH + Co. KG product portfolio can be summed up. Once again, the baling press manufacturer from South Germany has its finger on the pulse with this new development, as the baling press is perfect for the market and its currently increased requirements.
The continuous increase in cardboard consumption and the growing mountains of packaging waste have also meant increased requirements for recycling. Storage and warehouse space needs to be used more and more efficiently, or is perhaps not even available. The HSM V-Press 860 TimeSave decreases the volume of recyclable material by up to 95 percent and, with segregated bales, generates a secondary raw material which can be put back into the recycling loop. The positive side effect: over a certain weight, the bales have a substantial market value. The high degree of compression saves storage space and facilitates transportation. Less strapping material is also required.
Thanks to the time-saving lifting-tilting device, it only takes a few seconds to load the HSM V-Press 860 TimeSave using a collection cart. The bulky cardboard can first be collected in this large, robust collection cart. It is also not a problem if the cart is slightly overfilled. The cardboard is then compressed automatically without the need for prior cutting. The practical collection cart is available from HSM as an option. In a direct comparison to other vertical baling presses with automatic loading, up to one and a half hours can be saved per bale – each cart is emptied within 12 seconds. When compared to vertical balers with manual loading, the HSM V-Press 860 TimeSave can even save you up to five hours per bale. Moreover, the baler can be loaded manually at any time.
The bales are strapped 4-fold with Quicklink-wire and have been optimized for cost-effective storage, transport and commercialization. With maximum dimensions of 1200 x 780 x max. 1000 millimetres, the highly compressed bales reach a weight of up to 430 kilogrammes (depending on the material). The closed system allows for a simple, safe and clean operation.
With a pressing force of 594 kN and the quiet, energy-saving rapid-stroke technology, it is the economical and environmentally friendly solution for many waste disposal tasks. The rapid-stroke technology significantly lowers the power consumption and the drive power whilst simultaneously increasing the throughput performance. Using this technology, the stroke time is reduced by up to 40% in comparison to conventional drives. Due to a special pump technology, the machines are also particularly quiet.
Thanks to the special HSM TCS (TorsionControlSystem), the inclination of the pressing plate is monitored continuously in all directions. This prevents one-sided loading, optimizes the pressing process and therefore ensures a long operational life and a high degree of process reliability. The machine is controlled and operated using a modern micro-processor and a convenient membrane keypad with a graphics capable text display which shows the current status of the machine.
HSM develops, produces and sells products and systems for compressing materials as well as for shredding paper and electronic data media. Hermann Schwelling Maschinenbau GmbH + Co. KG was founded in 1971. Today the product range includes vertical and horizontal baling presses for retailers and manufacturers, PET/UBC compaction technology, fully automatic baling press systems up to a pressing power of 150 tons for professional waste disposal companies and individually projected facilities or special solutions.
Contact:
HSM (UK) Ltd.
Burntwood · Staffordshire
Tel. +44 1543 272-480
